ClearPathTM Jumpers Low Loss/Light Weight

	GrooveTube® Low Loss - Series 1 & 2
	Phase 3™ Ultra Low Loss - Series C
	GrooveTube® - Series 3 & 5
	NextPhase™Low Loss - Series 9
	Warrior Cable™ "Soldier Proof" RF Cables
	ClearPath™ Jumpers Low Loss/Light Weight - Series A
	JumpShot Jumper Low Cost - Series B
	Semi Rigid 0.034in to 0.250in
	Conformable Jumper Hand Formable 0.086in and 0.141in
	RG Cable Assemblies basic MIL-Spec Cable Assemblies
	Tower Series Corrugated Antenna Feeder & Jumper Cables - Series 7
	Custom Designs, Let MegaPhase Design a Cost-Effective Custom Solution to your RF Interconnect Problems!
	ToweFlex Series - LMR
	System Cable Part Numbering

ClearPath^TM Jumpers Low Loss/Light Weight - Series A

The Clearpath series cable offers a low loss cable solution without the cost of an
expensive high performance cable. This series employs the same microporous PTFE dielectrics used in the 9 Series high performance, low loss cables, but offers a simple double braid construction. This construction gives the Clearpath series exceptional electrical performance and allows for simplified connector attachments to reduce overall costs.

ClearPath Jumpers

Typical Insertion Loss
Max. Attenuation vs. Frequency (GHz)		A06 dB/ft	A08 dB/ft	A11 dB/ft	A15 dB/ft	A18 dB/ft	Conn. Loss dB	SWR (x.xx:1)
0.450	VHF	0.26	0.15	0.10	0.08	0.06	0.01	1.05:1
0.900	UHF	0.36	0.22	0.15	0.11	0.08	0.02	1.12:1
1.000	L	0.38	0.23	0.16	0.12	0.09	0.02	1.12:1
2.000	S	0.55	0.33	0.23	0.17	0.13	0.03	1.25:1
3.000	S	0.67	0.41	0.28	0.21	0.16	0.04
6.000	C	0.96	0.59	0.41	0.31	0.23	0.06
12.000	Ku	1.37	0.86	0.60	0.45	0.34	0.08
18.000	Ku	1.69	1.07	0.75	0.56	0.43	0.11	1.35:1

Note: Insertion Loss & SWR increases with non-precision or angle connector types.

ClearPath™ Electrical Data
	A06	A08	A11	A15	A18
Maximum Frequency	129 GHz, nominal	71 GHz, nominal	55 GHz, nominal	40 GHz, nominal	28 GHz, nominal
Impedance	50 ohm, nominal
Velocity of Propagation	74%, nominal	75%, nominal	76%, nominal		76.5%, nominal
Time Delay	1.37 ns/ft	1.35 ns/ft	1.34 ns/ft		1.33 ns/ft
Capacitance	32.0 pF/ft, nominal	27.0 pF/ft, nominal		26.9 pF/ft, nominal	26.7 pF/ft, nominal
Inductance	62 nH/ft, nominal	67 nH/ft, nominal			66 nH/ft, nominal
Shielding Effectiveness	-85 dBc, minimum
Temperature Phase Stability	25 PPM

ClearPath™ Mechanical Data
	A06	A08	A11	A15	A18
Jacketed Outer Diam.	0.060 inches, nominal	0.090 inches, nominal	0.110 inches, nominal	0.150 inches, nominal	0.195 inches, nominal
Jacket Type	FEP
Bend Radius	0.275 inches, nominal	0.400 inches, nominal	0.500 inches, nominal	0.800 inches, nominal	1.000 inches, nominal
Operating Temperature	-65 to +200 °C
Weight	0.010 lbs/ft	0.015 lbs/ft	0.020 lbs/ft	0.040 lbs/ft	0.050 lbs/ft
Outer Conductor	Flat Braid/Round Braid
Dielectric	Micr-porous PTFE Tape
Inner Conductor	Solid Ag-plated Copper				Stranded Ag-plated Copper
Maximum Assembly Length	100 ft	100 ft	100 ft	100 ft	100 ft
Flex Rating Highest - 5.0	4.5	4.5	4.5	4.5	4.5

ClearPath™ Standard Connectors
	A06	A08	A11	A15	A18
SSMP	•	•	•
SMP	•	•	•
MCX		•	•
SMC		•	•
SMB		•	•
SMA to 26.5 GHz				•	•
Type N to 18 GHz				•	•
BNC				•	•

Other connectors available on request.

FEATURES

Low Loss

Very Flexible

Cost Effective

APPLICATIONS

ATE

Jumpers

Switch Box

PDF DOWNLOADS

	ClearPath Jumpers Data Sheet

TECHNICAL DATA

	Derating vs. Temperature Data
	Jacketing
	MegaPhase Material Temp. Ratings
	Product Care & Handling
	Vibration Test Data
	Radiation Test Data
	SWR/Return Loss Conversion

website design and development by: jtdesigns.com