• New Connector Type ZN
• MegaPhase Introduces Warrior Cable™ for Ground Based Electronic Warfare
• AVAILABLE from MegaPhase®: 65 GHz Bias Tees w/ Precision V Connectors™.
• NEW SuperFlex™ 26.5 GHz Temperature Stable Test Cable.
• NEW 2003 Coaxial Cable Assembly Catalog.
• MegaPhase Batwing™- 8 Port Test Adapter for Tight Fit End-Launch Chipsets.
• MegaPhase PiggyBack™ Tests Tight Fit End-Launch Chipsets to 50 GHz.
• MegaPhase Designs New Precision High Temperature Type-N Adapter.
• MegaPhase VNA Series Test Cables Provide Low-Cost Alternative.
• MegaPhase Introduces New Twist on Type N Connector.
• NEW SiteLine™ Series Test Cable Design.
• MegaPhase NEW Chip Measurement Series Test Cable.
• MegaPhase Vector Network Series Cable Assemblies.

Contact MegaPhase for more information at 570-424-8400 or sales@megaphase.com. For more information, press only, contact marketing@megaphase.com.

New Connector Type ZN. Quick Disconnects Equivalent to Type N through 15 GHz

Stroudsburg, PA - September 4, 2007 – NOW Available – MegaPhase LLC, a leading manufacturer of RF cable assemblies and adapters announces the release of the new precision Type ZN quick disconnect connector and adapter line, a bayonet-style equivalent to a Type N.

MegaPhase® ZN Series precision coaxial connectors and adapters are ideal for applications where there are constraints on space. The bayonet-style coupling nut is easily mated and de-mated with a quarter turn, without the need for a torque wrench. For applications such as antenna systems, rapid deployment terminals and SATCOM, the ZN connector provides excellent mechanical stability and eliminates the need for lock wiring in high vibration environments. Also ideal for test systems, this connector provides a fast and accurate method for continuous connects and disconnects.

The connectors are “keyed” with 2-, 3- or 4- lug style. In addition to the ZN MegaPhase also offers a full line of both RF in-series and between series coaxial adapters through 67 GHz.

Contact MegaPhase for quote and complete data (570) 424-8400 or Sales@MegaPhase.com.

MegaPhase Introduces Warrior Cable™ for Ground- Based Electronic Warfare

Stroudsburg, PA - August 6, 2007 –MegaPhase, a leading provider of RF cables, introduces its new line of rugged cable assemblies for ground-based electronic warfare applications. The Warrior CableTM includes 4 configurations to meet the demands of various applications, most commonly from HF through X-band. Attenuation specifications are as low as 0.14dB/ft and power handling as high as 900 Watts CW at 6 GHz.

The Warrior CableTM is field proven with over 80,000 cables fielded in support of OIF and OEF. This product is based on MegaPhase’s proprietary GrooveTube® Technology, an ultra-rugged outer conductor that withstands 250 lbs/in of crush forces. These cables are ultra-flexible for easy installation on vehicles, and jacketing is weather and chemical resistant. Each cable assembly is serialized and 100% tested for mechanical durability, including pull tests, and electrical data including S- Parameters.

The Warrior CableTM is available with all common connectors, including BNC, TNC, Type N, SMA, 2.92mm and 2.4mm through 50 GHz. Also available are quick-connect/disconnect connectors ZMA and ZN.

AVAILABLE from MegaPhase®: 65 GHz Bias Tees w/ Precision V Connectors™.

Stroudsburg, PA - August 1, 2003 - Optimized for optical communications and other high-speed pulse, data or microwave test applications. Featuring a fast rise time of < 5ps, low insertion loss < 2.5dB and flat group delay of 113 +/- 2ps. No minimum purchase quantity on full range of precision test components, adapters, coaxial cables and connectors. For complete information 877-MEGAPHASE / 877-634-2742.

NEW MegaPhase® SuperFlex™ 26.5 GHz Temperature Stable Test Cable.

Stroudsburg, PA - May 12, 2003 - MegaPhase LLC, announces the new and improved MegaPhase® SuperFlex™ 26.5 GHz test temperature stable cable. The new SuperFlex™ is phase and amplitude stable with unparalleled temperature stability of < 7ppm per °C from –40° to +125°C. MegaPhase recently added a neoprene jacketing to further enhance the flexibility of this cable for ATE applications. The SuperFlex™ is based on the MegaPhase® industry-leading pure copper GrooveTube® outer conductor technology, synonymous with stability versus flexure.

The SuperFlex™ operating temperature range is -70° to +121°C. The phase and amplitude change versus flexure, measured for a 360º wrap around a 4.75-inch mandrel, is < 1.8° and < 0.02 dB at 5 GHz and < 4.0° and < 0.05 dB through 26.5 GHz. The construction is a stranded silver-plated copper inner conductor, PTFE tape dielectric, GrooveTube® outer conductor, metal braid ruggedization, a neoprene outer jacket, finished with heavy-duty strain reliefs. The finished outer diameter measures 0.285 inches (7.24 mm).

Standard connectors include 2.92mm, 7mm, 3.5mm, SMA, TNC, and Type N, all with MegaPhase Factory Form™ Right Angles available. SuperFlex™ test cable assemblies are available with the MegaPhase Rapid Response fast delivery system—built-to-order in 1 week or less. Pricing varies depending on cable length, maximum operating frequency, and connector combination.

NEW 2003 Coaxial Cable Assembly Catalog.

Stroudsburg, PA - January 24, 2003 - NOW AVAILABLE - NEW -MegaPhase® Test Products and MegaPhase® System Products Catalog: RF/Microwave high performance cable assemblies to 50 GHz. Industry-leading phase/amplitude stability featuring GrooveTube® flexible copper outer conductor. All MegaPhase® product lines are showcased in two separate catalogs: Test Products Catalog and Systems Products Catalog and have product photos, complete data charts, data graphs and part numbering information. Products include VNA test cable assemblies for lab, field and production testing, low loss flexible coax, semi-rigid, adapters and torque wrenches for test & interconnect of airborne, space, semiconductor, defense, broadband, optical network, and communications. MegaPhase® products offer low-cost alternatives to OEM test cables and military and space heritage. Have a catalog sent to you immediately - Catalog@MegaPhase.com / 570-424-8400 or www.MegaPhase.com.

MegaPhase Batwing™- 8 Port Test Adapter for Tight Fit End-Launch Chipsets.

Stroudsburg, PA - November 18, 2002 - MegaPhase LLC, a leading manufacturer of coaxial test cables and adapters announces the release of the MegaPhase® Batwing™ Chipset Test Adapter. The Batwing™ enables test engineers to easily connect network analyzer ports to chipsets with closely spaced (0.141in) end-launch connectors through 65 GHz. The Batwing™ test adapters are phase/delay matched and fixed electrical data can be easily added to software error correction models.

Each Batwing™ adapter has eight ports and a length up to 4.5 inches. A custom spacing block is used to maintain consistent distance between connectors for multiple connect/disconnect cycles. This block can also be configured with mounting holes for permanent test fixtures.

Phase/delay matched cables are fixed within lightweight mounting blocks and are typically configured with VP, SSMP, or SMP connectors on the DUT end, and 1.85mm, 2.4mm, 2.92mm or SMA connectors on the VNA end. VSWR 1.5:1 max through 65 GHz with an operating temperature range of -30 to +125 C°. The standard precision connectors mate with standard MegaPhase® MegaRED Bench Test Cable or MegaPhase® GrooveTube® VNA Cables. These cables and Batwing™ adapter sets solve your ATE adapter problems for test of both digital and analog data, clock and RF differential signals.

MegaPhase PiggyBack™ Tests Tight Fit End-Launch Chipsets to 50 GHz.

Stroudsburg, PA - September 17, 2002 - MegaPhase LLC, a leading manufacturer of coaxial test cables and adapters announces the release of the MegaPhase PiggyBack™ adapter. The MegaPhase PiggyBack™ enables test engineers to easily connect network analyzer ports to chipsets with closely spaced (0.141in) end-launch connectors through 50 GHz. The PiggyBack™ test adapters are phase/delay matched and can be easily added to software error correction models.

Each PiggyBack™ adapter is made to your specifications, and configurations range from 2 ports to 6 ports. The total length ranges from 2.5 to 4.5 inches, and use a custom spacing block to maintain consistent distance between connectors for multiple quick connect/disconnect cycles. This block can also be configured with mounting holes for permanent test fixtures.

Phase/delay matched cables are fixed within lightweight mounting blocks and are typically configured with SSMP or SMP connectors on the DUT end, and 1.85mm, 2.4mm, 2.92mm or SMA connectors on the VNA end. VSWR 1.5:1 max through 50 GHz with an operating temperature range of -30 to +125° C. The standard precision connectors mate with standard MegaPhase MegaRED Bench Test Cable or MegaPhase GrooveTube® VNA Cables. These cable and adapter sets complete your ATE interconnects for test of both digital and analog data, clock and RF differential signals.

MegaPhase Designs New Precision High Temperature Type-N Adapter.

Stroudsburg, PA - September 17, 2002 - MegaPhase LLC, a leading manufacturer of coaxial cables and adapters announces the release of a new precision high temperature coaxial adapter. The MegaPhase Type-N is an in-series female-to-female type-N adapter. It features an operating temperature through +300° C, low VSWR and insertion loss, and rugged construction for consistent electrical performance. The maximum operating frequency is 18 GHz depending on the interface. Insertion length is 2.24 in. / 5.69 cm. Phase matching is available.

The MegaPhase Type-N adapter provides a bulkhead interface for applications where temperatures exceed the normal operation of standard type-N designs. The unique design uses a high temperature alloy for the contacts and insulator to achieve the higher operating temperature stability. The MegaPhase Type-N adapter is for temperature chamber testing, gauge and sensor systems and severe environmental conditions. MegaPhase Part Number CA-2B22-T.

MegaPhase VNA Series Test Cables to 50 GHz Provide Test Engineers with a Low-Cost Alternative to OEM Cables.

Stroudsburg, PA - June 28, 2001 - MegaPhase, the manufacturer of GrooveTube® test cables now provides a VNA test cable rivaling OEM products through 50 GHz. The new VN Series is a highly flexible armored test cable used in demanding lab or production environments, where exceptional phase and amplitude performance are necessary. The MegaPhase VN Series offers a low cost but high performance alternative for test engineers.

The MegaPhase VN Series phase and amplitude change versus flexure, measured for a 360° wrap around a 4.75 inch mandrel, is typically < 10° and < .09 dB through 50 GHz; through 18 GHz typically < 3° and < .04 dB with excellent recovery. Standard connectors include 2.4 mm, 2.92 mm, 7 mm, 3.5 mm, SMA, Type N and "ruggedized" female port connectors, available for direct interface to instrumentation ports. Standard cable types are available for fast delivery.

MegaPhase Introduces a New Twist on a Type N Connector For Test & Production Applications through 18 GHz.

Stroudsburg, PA - April 3, 2001 - MegaPhase, an international manufacturer of high performance RF/Microwave cable assemblies, designed a standard MIL-39012 type N connector with a hex, knurl nut for easy connect and disconnect cycles. Designed for test and production applications where hand tightening of N connectors is advantageous instead of using a torque wrench.

The use of torque wrench can slow down repetitive connecting tasks and increase the risk of over-tightening leading to cable breakage. The low VSWR design is available on all MegaPhase high performance test and in-system cable assemblies through 18 GHz. The catalog part number for this connector is simply NK. Standard length cable and connector configurations are available for fast delivery.

NEW SiteLine™ Series Test Cable Designed for Portable Cell Site Measurements in all Environments.

Stroudsburg, PA - April 25, 2000 - MegaPhase has developed the new Site Measurement Series test cable for use with hand-held communication site measurement instrumentation, including the Anritsu Sitemaster™ and Bird Site Analyzer™. This ultra-rugged armored cable performs stable, reliable, and repeatable measurements in the field and is ideal for field-test applications in Cellular, PCS/DCS, paging, LMDS, WLAN/WPBX and microwave frequencies. The Site Measurement SM Series is quickly becoming the preferred choice of many field service technicians.

The MegaPhase SM Series is available with common connector types including Type N, 7-16, TNC, SMA and the K Connector® (2.92mm). This high performance test cable is reinforced with stainless steel armoring to protect the cable inside and made with the highly flexible MegaPhase GrooveTube® outer conductor. Additionally, the molded strain relief is uniquely designed to decrease breakage and reduce site maintenance costs. MegaPhase also provides a product warranty.

Located in Stroudsburg, Pennsylvania, MegaPhase LLC provides RF & microwave cable assemblies to test, connect and enable electronic systems worldwide. The company's industry-leading test cable products are used in a wide range of applications including instrumentation, wireless communications, space, airborne and defense. MegaPhase brings value to a diverse range of customers through its quality products, services and support.

MegaPhase NEW Chip Measurement Series Test Cable For RF/Microwave Chipset Measurements.

Stroudsburg, PA - February 25, 2000 - MegaPhase, top international suppliers of high performance RF/Microwave cable assemblies announce their NEW Chip Measurement Series test cable. The product is designed specifically for the test and measurement of 1 GHz to 18 GHz RF & Microwave chip sets. The cable assembly is super-flexible and lightweight and is available in two designs with finished outer diameters 0.090 inches and 0.162 inches.

The cable assembly is ideal for testing lightweight devices because the small diameter and super flexible cable minimizes side-loading when testing chips. Chip Measurement Series super-flexible cables are available with common connector types, including SMA, SMB, MCX, SMP and MMCX.

One design has 18 GHz maximum frequency, 0.080 inches diameter cable, PTFE clear jacket, stranded SPC center conductor, static bend radius 0.4 inches, -65 to +200 C operating temperature range, and jacketed weight 0.20 lbs./ft. The second design has 18 GHz maximum frequency, 0.150 inches diameter cable, FEP clear jacketing, PTFE tape dielectric, solid SPC center conductor, static bend radius 0.8 inches, -65 to +200 °C operating temperature range, and 0.40 lbs./ft jacketed weight. Standard cable types stocked and available for prompt, fast delivery.

MegaPhase Vector Network Series Cable Assemblies -- New Ruggedized Design at Low Cost Price for use as an alternative to Original Equipment Manufacturers.

Stroudsburg, PA - February 25, 2000 - MegaPhase, an international supplier of high performance RF/Microwave cable assemblies, now provides a new VNA test cable through 50 GHz. The new Vector Network Analyzer Series is a highly flexible armored test cable used in demanding lab or production environments, where its exceptional electrical performance and substantial mechanical integrity are a must. Phase and amplitude change versus flexure is typically < 10° and < .09 dB through 50 GHz. Change through 18 GHz is typically < 3° and < .04 dB and return is virtually to zero. Standard connectors include SMA, N, 7mm, K, 3.5mm and 2.4mm; plus female ruggedized port interfaces for direct connection to instrumentation ports. Standard cable types are available for fast delivery.